Home | Team Quake | How To Buy | News | Contact Us | Gallery
Amplifiers  |  Woofers  |  Speakers  |  Audio Processors  |  Separates  | Accessories
Music As It Was Intended

Available in two different non compromising packages, the refined Focus matched component sets are transparent only to the eyes. The one inch Neodymium Silk dome tweeters, coupled with the custom built 18dB per octave crossovers, have been praised by reviewers around the globe for their unmatched sound quality. And For those of you can't control your selves there is a Raychem Poly-Switch that protects against voice coil meltdown.

The ULTRA SOFT long excursion suspension allows for maximum SPL when driven at low power - head unit; yet, the FOCUS midranges are designed with enough mechanical clearance to "ROCK" when driven at high power.

The optimally balanced combination of midranges, tweeters, and crossovers fulfill the front staging and stereo imaging gaps inherent in factory installed stereo systems. The superb sound quality of the Focus will earn you big points in competition.

COMPONENT SETS
MODEL: FC6.2
  • 180 Watts Max
  • Frequency Response 55Hz-22kHz
  • Impedance: 4-Ohm
  • Two 6-1/2" midrange drivers:
    * Wide edge rubber surround
    * PistonMax Technology
    * Shallow mount
    * Poly injection cone bodies
    * 1" high temperature voice coil
  • Two 1" silk dome tweeters:
    * Neodymium magnet
    * Angle / flush / surface mount options
  • Two Carbon Fiber Xover networks:
    * 18dB/Oct. 2-way cross over
       network @ 4kHz
  • +/- 3dB boost/cut controls
  • MSRP: $206.00/set
MODEL: FC5.2
  • 150 Watts Max
  • Frequency Response 65Hz-22kHz
  • Impedance: 4-Ohm
  • Two 5-1/4" midrange drivers:
    * Wide edge rubber surround
    * PistonMax Technology
    * Shallow mount
    * Poly injection cone bodies
    * 1" high temperature voice coil
  • Two 1" silk dome tweeters:
    * Neodymium magnet
    * Angle / flush / surface mount options
  • Two Carbon Fiber Xover networks:
    * 18dB/Oct. 2-way cross over
       network @ 4kHz
  • +/- 3dB boost/cut controls
  • MSRP: $184.00/set
Focused On The Finer Details

Revealing Coaxial Speakers

The Earthquake Focus coaxial speakers deliver accurate and clean sound through out your entire vehicle. These speakers produce quality mid-mass and precision highs under any circumstances. Earthquake uses black chrome baskets, bronze fiber impregnated poly cones, high strength wide rubber surrounds and a poly switch for protection against over powered situations.

FOCUS COAXIAL SPEAKERS

 

MODEL: F6x9
  • 300 Watts Max
  • FR: 40Hz-22kHz.
  • Sensitivity 90dB
  • 3/4" mylar dome tweeter, with neodymium magnet
  • 2" High effeciency mylar mid-range driver
  • 6 x 9" poly injection cone
  • Wide edge butyl rubber surround
  • Polyswitch tweeter protection
  • MSRP: $160.00/pair
MODEL FS6.5
  • 100 Watts Max
  • FR: 55Hz-22kHz.
  • Sensitivity 89dB
  • Swiveling 3/4 " ehanced frequency silk dome tweeter
  • 6-1/2" poly injection cone
  • Wide edge butyl rubber surround
  • Polyswitch tweeter protection.
  • $140.00/pair
MODEL: F5x7
  • 130 Watts Max
  • FR: 63Hz-22kHz.
  • Sensitivity 88dB
  • Swiveling 3/4 " ehanced frequency silk dome tweeter
  • 5 x 7" poly injection cone
  • Wide edge butyl rubber surround
  • Polyswitch tweeter protection.
  • $120.00/pair
MODEL: F5.25
  • 90 Watts Max
  • FR: 70Hz-22kHz.
  • Sensitivity 87dB
  • Swiveling 3/4 " ehanced frequency silk dome tweeter
  • 5-1/4" poly injection cone
  • Wide edge butyl rubber surround
  • Polyswitch tweeter protection.
  • $120.00/pair
MODEL F4.0
  • 70 Watts Max
  • FR: 78Hz-22kHz.
  • Sensitivity 86dB
  • Swiveling 3/4 " ehanced frequency silk dome tweeter
  • 4 " poly injection cone
  • Wide edge butyl rubber surround
  • Polyswitch tweeter protection.
  • $99.00/pair