Articles in Category: Home Audio News & Reviews

Couch Potato: CP8, Review by: Jim Milton

 

By Jim Milton, Secrets of Home Theater and High Fidelity

Original link here.

Introduction

Is there a more apropos name for a manufacturer of subwoofers than Earthquake? True, they now make a fine line of speakers and their power amplifiers have won many awards, but their real claim to fame has always been their subs. During my recent trip to CEDIA last fall, I had the pleasure of meeting with Abraham Sahyoun, Earthquake’s marketing director. He encouraged me to attempt to lift the Super Nova Subwoofer off its display pedestal…he grinned while I attempted and failed…and then told me that it weighed in excess of 300 pounds.

The point he was making is that Earthquake constructs all their subs with quality, care and performance as their fundamental design goals. Earthquake is serious about bass! He then demonstrated the sub with a 14Hz test tone passing through it. It was barely audible to the human ear, but the cone was moving with a greater than 3 inch excursion that could be felt. As I recall, he explained that a 1 pound weight was applied to the inside of the diaphragm to assist control of the excursion and keep it from flying apart. From my observation, the Super Nova worked just fine while it massaged my insides with its powerful bass. It had me grinning like a Cheshire Cat.

He then introduced to me a new sub that, at that time, was not released to the public; the CP-8. With dimensions measuring at 7" H x 12" W x 25" D, it was certainly one of the most diminutive subs Earthquake has produced. With only an 8 in. driver, what was the point? When he said that the CP stood for “couch potato”, I thought that perhaps he was kidding. Such was not the case. This sub is labeled as a “special applications” subwoofer. The sub was designed to literally be placed under or behind your seating area, whether couch, chair or bed. The benefits of such a placement will be revealed in this review.

Design

Mr. Sahyoun explained that the CP-8 was designed to have a placement in close proximity to the listener which delivered a few key audible advantages. First, the bass response time would be better realized as compared to the typical sub placement, say in the front of the room by the mains or in the front corner away from your main seating position. Next, the volume of the sub could be turned down more if it were located closer to you. A closer proximity also lessens the chance of sitting in a null at the primary seating position. But the real benefit was the seismic sensation you experienced as you felt the effects of the sub being just a few feet away.

The CP-8 has a 150 watt digital amplifier on board and a long throw 8" driver in a ported enclosure. The driver was remarkably well built and appeared to be in the same general design of the Super Nova. Underneath, there were hi level inputs as well as R/L line level inputs. Volume and phase adjustment were present as well.

Setup

A stereo line level cable with a convenient 900 angle is provided with additional rubber feet should you chose to place the CP-8 on its side or on-end between your couch and wall.

I currently have an in-wall sub and had the opportunity to play them together and individually for comparison. Now mind you, my in-wall cost over 3 times as much as the CP-8, so I did not really expect this to be an “apple to apple” comparison, but I was surprised at the performance of this little upstart. On the first day I auditioned the CP-8, I placed it along the side wall, opposite of my in-wall, to see if it would balance out some bass modes. After some adjusting of the volume and setting my crossover to 80 Hz on my processor ( I like to turn my subs crossover point to its highest setting and letting my processor take control), set up was complete. My in-wall sub has a remote which allowed an on/off control comparison from my seat. This feature was a boon as it allowed me to compare both subs together or drop out the in-wall to hear if I was missing sounds on the low end when the CP-8 was allowed center stage. I noticed only a very slight loss of fullness in the bass when the CP-8 played solo.

For the sidewall demo, I placed the CP-8 on its side with the driver facing out into the room. This made tweaking easier as well as allowing direct observe the cone excursion and to hear if the 8 incher was being overly stressed. When driven hard, it never exhibited strain, though the cone was pumping vigorously. I was impressed! No distracting port noises or huffing were noted.

The real fun began when I placed the CP-8 behind my chair, as it is intended. I found myself reaching behind the chair to adjust the volume lower as the bass was really quite over powering.

In Us

Eventually I whipped out my trusty SLP meter and brought the bass output down into line with my Revel F12s. I began my audition with the “Flight of the Phoenix” (Dennis Quaid not Jimmy Stewart). The exhilarating scene where they “gently” set the plane down on those soft, downy sand dunes…was GREAT! Every time the plane smacked into a dune, my chair vibrated forcefully in tune with the impact of the plane. This was my first real experience with what would be considered a tactile transducer and I was having some fun now. I called my wife up into the media room and demoed the scene for her and she nearly jumped out of the chair. She gave her tacit approval and went back to her book reading downstairs. (Really, she was impressed but didn’t want to let on about it. ) After a bit more adjusting with the volume, I was able to get the vibrations to only be felt on the really loud and deep bass. This added an exciting sensation during action movies while producing solid, tight bass sound.

With my in-wall engaged or not, the added dimension of tactile bass really added to my enjoyment of movie viewing. Master and Commander was better than I remember at the local cinema. The cannon fusillade in the first 10 minutes of the film were all the more terrifying because of the percussive roar and shaking of my seat. The Dark Knight is another film that uses explosions to, shall we say, advance the plot. Again, the deeper explosions rocked my seat and really pulled me deeper into the movie experience. Overall, every action movie I played was enhanced with the CP-8…but how would all this play out with music? Would this effect become a distraction or an annoyance?

I love classical music and organ music in particular. The CP-8 will play low enough to cover almost all types of music that you would listen to. For general orchestral music, I played Bartok, Copland and Brahms. All three had compositions that had brass and tympani generously sprinkled throughout their works. I found that other than the very lowest or loudest passages, the tactile sensation was rarely experienced. When sensed, it was very brief and non-distracting. Indeed, the slight shaking of the seat during a particularly deep pedal note on the organ felt “right” somehow. Same as what you would actually be subjected to in a seat during a live concert. My initial fear was that it would be too much of a good thing and really become distracting from the actual enjoyment of the music. But when really called upon ("Fanfare for the Common Man" - Copland), the impact of the kettle drum was felt as well as heard. And as it should be. For good old rock-n-roll, I tried Porcupine Tree’s Light Bulb Sun, in high resolution surround.

Once more, the bass was satisfying and made its presence felt. Eventually I noticed that when I played my in-wall sub alone, it seemed less engaging then when it was supplemented with the CP-8. I believe that this was a good thing as the sub was working as it was designed to perform.

Conclusions

I am an advocate that two subs are better than one. Not just because two play louder than one, but that two will help smooth out bass modal inaccuracies and provide better quality bass throughout the entire listening area in your room. This certainly was achieved with the CP-8 along with my in-wall. The big advantage of this small sub is the flexibility to place it anywhere within the room where it may be both heard and experienced. Movies were more engaging. Music was more palpable and “live”. I see a few other specific usages for the CP-8. It could also be used in a college dorm room, bolster the gaming experience with PS3 or Xbox, adding depth to a living room music system where you want bass to be heard, but not seen, or in my case, enhance the already good HT / music room with a bit more punch.

Weaknesses? Sure. I would not recommend this as a stand alone sub in a moderate to large room. In the Pantheon of subwoofers, the CP-8 is not the “god of thunder”. A larger sub may give you more subsonic depth, but at this price point, you could buy two or three and still come out ahead compared to the cost of one 15" modular sub. You would also benefit from smoother bass response through your entire room. Adding the tactile sensation you experience at your seat would be serendipity!

The size and shape allow for easy concealment, and the bass output is nothing short of remarkable. I have a friend who has a HT in his bedroom and this would easily fit under his bed (but he should discuss this with his wife first, I would think). If you are in the market for a tactile transducer, why not have one that actually outputs substantial bass as well? The Earthquake Audio CP-8 left me shaken and satisfied while adding some “fun” to my media enjoyment at a modest cost. Anything that adds to the excitement of a movie experience or enhances the enjoyment of music listening is worth considering, in my opinion. The CP-8 has my seismic approval.

 

 

 

 

 

RAVE REVIEW: Earthquake Cinénova Grande Multichannel Amplifier - Richard Hardesty

Earthquake Cinénova Grande 5-channel Power Amplifier
Earthquake Sound Corporation is a division of Hohmann International Group. They manufacture mobile, home and pro audio electronic components with a factory in Menlo Park, California and associations in Asia. The Earthquake brand is well known in car audio and the company also makes huge quantities of OEM electronic devices which are incorporated into other manufacturer’s products or sold under other brand names as complete components.

Earthquake has recently started to branch out into markets by introducing home theater speaker systems, subwoofers (see WSR’s Essential Subwoofer Buyer’s Guide™ for reviews of two of their models) and the flagship home theatre amplifier reviewed here.
The Cinénova Grande multichannel amplifier submitted for this review is an impressive piece that should bring some well-deserved attention to the Earthquake brand name in the home theatre arena. The Cinénova amplifier is made in the USA.

Outside
The Earthquake Cinénova Grande is a huge amplifier that weighs 125 pounds. It is bigger and more powerful than other amplifier in this review group and, for that matter, most other amplifiers in the review series. It has bold, dramatic appearance and is nicely finished.

The front panel is made from a thick, aluminum extension. Six polished horizontal fins and the Cinénova Grande badge are produced by CNC machining on the face of this extrusion and the result is an elegant, if somewhat less than subtle, three-dimensional look. There is a power switch at the lower left of the front panel with an integral LED power indicator and five LEDs labeled LF, Center, RF, LS, RS are centered on the lower section of the panel. These LEDs show when the indicated channel is over-driven (clipping) but I never saw them light up and I doubt that most users will either. Driving an amplifier with this much power into clipping is likely to damage your speakers and your ears.

Large sturdy handles on the front panel makes it a little easier to move this behemoth around but positioning the Cinénova Grande on a shelf is still a two man job. (There is only one of me so I placed the amplifier on an amp stand between my front speakers for the listening session.

The back of the amplifier is divided up into six segments. The power input segment at the right edge that contains a 20amp AC connector for a removable power cord, a 20amp circuit breaker for additional electrical protection. And a 25-pin parallel port with audio input connection for each channel plus two trigger connections.

Each of the five amplifier modules has its own connector plate and these segments constitute the remainder of the back panel. There are single-ended RCA input connectors and five-way binding post speaker output connectors for each channel. There are fuse holders for plus and minus rail fuses on each module connector plate along with LEDs to indicate when a rail fuse is blown.

Each amplifier module has a selector switch to engage a built-in high-pass/low-pass filter. The user can select high-pass, low-pass or bypass and choose a crossover frequency between 20Hz and 5kHz.

The 12 gauge steel cover is very heavy and it is attached by no fewer than 23 socket head cap screws.

Inside
The chassis layout of the Cinénova Grande is similar to the other amplifiers in this review segment, but everything is scaled up in size. There is an enormous 40 pond, 3.6kVA, ferrite core toroidal power transformer positioned vertically just behind the front panel. This transformer is constructed with special attention paid to the inductance of the primary windings. The transformer primary is said to have ideal inductance characteristics allowing it to act as a power line-filter, which can smooth the "power factor" notch from the AC line. The toroidal transformer has independent secondary windings for each amplifier channel. The transformer mount is isolated with ten layers of pressed foam for mechanical hum suppression.

The amplifier modules start just behind the power transformer an extend to the rear of the unit. They are arranged side by side in the densely packed interior of the chassis. Each of the five amplifier modules is completely independent and easily removable. Earthquake has trademarked the acronym EZXS to describe the easy access to the amplifier modules, which can be individually removed and serviced without dismantling the entire amplifier.

Each amplifier channel has rectification and 24,000µf of capacitance. JFET inputs, bipolar drivers and bipolar outputs are utilized. Components are mounted on multi-layer, glass-epoxy, double-sided printed circuit boards with ground plane isolation and heavy copper traces. There are 10 output devices per channel.

Each amplifier module has a built-in, fully buffered high-pass/low-pass variable filter. Each module can run full-range or can be low-pass or high-pass filtered at frequencies between 20Hz and 5kHz.

The Cinénova Grande is rated at 300 watts per channel into eight ohms, 600 watts per channel into four ohms and 1000 watts per channel into two ohms, with all channels driven. Its robust construction should allow it to easily meet the four-ohm spec making it one of the most powerful multi channel amplifiers that I’ve reviewed. The two-ohm spec is quite reasonable for a typical duty cycle but you’ll need special wiring to wring more than five kilowatts from the wall.

Sound
The power of the Cinénova Grande amplifier was indeed very evident in my listening test. This amplifier seemed to loaf along effortlessly at levels where others were beginning to sound strained. Bass control was exemplary as the amplifier took complete command of the loud speakers.

I used stereo and multi channel music recordings to evaluate the sound of the Cinénova and I watched a variety of movies with this amplifier as a power source. It performed admirably in all circumstances.

The Earthquake amplifier performed quieter than the others in this group. This increased (perceived) signal-to-noise ratio allowed more details about the signal to become clearly audible. There was a sense of clarity and ease to the sound that others couldn’t quite match. Lateral image focus was excellent and a sense of depth or three-dimensionality was very well presented. The sound was smooth and musical up to very high levels whether listening to a music CD or watching an action film on DVD. The Cinénova started to sound just a little hard on extreme peaks at the top end of its power range but this only occurred at extremely high levels in testing, never in normal listening.

The Cinénova Grande equaled or exceeded the dynamic power of any amplifier I've reviewed. The Cinénova easily matches or beats anything I've heard in the $4k price category.

Conclusion
The other amplifiers in this group each deliver a lot of high quality sound for the money. This one provides a little more of everything for a little more money.

The Earthquake amplifier delivers far more real world power than most other contenders for the high power throne and it sounds better too. It's significantly more powerful than the others in this group and it delivers slightly more refined sound. While the manufacturer's suggested retail price of this amplifier is $4,000, the street price may be lower. You won't get more value for your money anywhere. Highly recommended
 
 

Follow Earthquake

on Social Media

COPYRIGHT © EARTHQUAKE SOUND CORPORATION. ALL RIGHTS RESERVED.
DEVELOPED BY THE MICROTECHS, LLC